Rohde & Schwarz FSP7 - Checking Level Accuracy and Frequency Response with Preamplifier

R&S FSP Performance Test
1164.4554.82 1.29 E-1
Checking Level Accuracy and Frequency Response with
Preamplifier
Test equipment:
- Signal generator :
R&S FSP 3: Refer to "Measurement Equipment", item 3.
R&S FSP 7: Refer to "Measurement Equipment", items 3 & 5.
Frequency range:
R&S FSP 3: 10 MHz to 3 GHz
R&S FSP 7: 10 MHz to 7 GHz
Maximum level  0 dBm
- Power meter (refer to "Measurement Equipment", item 8)
- Power sensor:
R&S FSP 3: Refer to "Measurement Equipment", item 9.
R&S FSP 7: Refer to "Measurement Equipment", items 9 & 10.
Frequency range:
R&S FSP 3: 10 MHz to 3 GHz
R&S FSP 7: 10 MHz to 7 GHz
maximum power P
max
 100 UW
RSS referenced to indicated power
1 MHz to 1 GHz  1.5 %
1 GHz to 7 GHz  2 %
impedance Z = 50 
- Power splitter (refer to "Measurement Equipment", item 6)
Frequency range:
R&S FSP 3: 10 MHz to 3 GHz
R&S FSP 7: 10 MHz to 7 GHz
Level imbalance
1
) 1 MHz to 1 GHz  0.1 dB
1 GHz to 7 GHz  0.2 dB
1
) If a power divider with higher level imbalance is used, correction
of the measured frequency response is recommended.