R&S FSP List of R&S FSP parts including spare parts
1164.4556.82 5.7 E-2
List of R&S FSP parts including spare parts
The R&S FSP is constructed in accordance with R&S design 2000.
Overall dimension: W x H x L, 372.75 x 176.50 x 395.00
Rack mount: 4E 7/8 T350
Accessories: 19'' Adapter ZZA-411, Stock No. 1096.3283.00
Note:
The recommended spare parts are marked with an x in the last column.
Table 5-2 List of all R&S FSP part and spare parts
Position Designation Stock No. Number
Electrical
designation
Recommended
spare parts
Document 1164.4391.01 (R&S FSP Basic Unit)
10 BASIC UNIT 1164.4404.02 1 S
11 BASIC UNIT 1164.4404.05 1 S
15 FAN 1093.4614.00 1 S E1 x
20 ATTENUATOR (R&S FSP-3/7) 1067.7684.03 1 S A40 x
30 ATTENUATOR (R&S FSP-13/30) 1046.5024.05 1 S A40 x
35 ATTENUATOR R&S (FSP 40) 1046.5099.03 1 S A40 x
36 RELAIS 1164.4804.00 1 S K1 x
37 RELAIS HOLDER 1164.4704.00 1 S
38 DIN7985-M2.5X16-A4-PA 1148.2869.00 2 S
39 DIN965-M2.5X6-A4-PA 1148.3288.00 2 S
40 SCREW WITH WASHER ASSEMBLY M2.5X6 1148.3059.00 2 S
42 SCREW WITH WASHER ASSEMBLY M3X8 2084.7991.00 2 S
43 SCREW WITH WASHER ASSEMBLY M2.5X8 0041.1653.00 2 S
50 KEY PROBE BOARD 1093.7742.02 1 S A80 x
55 DIN965/ISR-M2.5X6-A4-PA 1148.3288.00 3 S
60 SUBASSEMBLY PLATE 1164.4456.00 1 S
70 DIN965/ISR-M2.5X6-A4-PA 1148.3288.00 5 S
80 Adhesive foil 30X20 SW 1093.9051.00 3 S
To Next Page
Loading...
