Instrument Tour
R&S
®
FSVA3000/R&S
®
FSV3000
40Getting Started 1330.8073.02 ─ 03
Instrument damage caused by cleaning agents
Cleaning agents contain substances such as solvents (thinners, acetone,
etc.), acids, bases, or other substances. Solvents can damage the front
panel labeling, plastic parts, or screens, for example.
Never use cleaning agents to clean the outside of the instrument. Use a
soft, dry, lint-free dust cloth instead.
5.1.1 Power Key
The power key is on the lower left corner of the front
panel. It starts up and shuts down the instrument.
See also Chapter 4.1.5, "Switching the Instrument On
and Off", on page 17.
5.1.2 USB
The front panel provides three female USB connectors (USB-A) to connect devi-
ces like a keyboard or a mouse. In addition, a memory stick can be connected to
store and reload instrument settings and measurement data.
The rear panel provides further USB connectors, including a male (USB-B)
connector. See Chapter 5.2.4, "USB", on page 52.
All USB connectors support standard 2.0.
5.1.3 System Keys
System keys set the instrument to a predefined state, change basic settings, and
provide print and display functions.
A detailed description of the corresponding functions is provided in the user man-
ual.
Front Panel View
To Next Page
Loading...
