Instrument Tour
R&S
®
FSVA3000/R&S
®
FSV3000
52Getting Started 1330.8073.02 ─ 03
For details, see Chapter 4.5, "Setting Up a Network (LAN) Connection",
on page 28.
5.2.4 USB
The rear panel provides four additional female USB (USB-A) connectors to con-
nect devices like a keyboard, a mouse or a memory stick (see also Chapter 5.1.2,
"USB", on page 40).
Furthermore, a male USB Device connector (USB-B) is provided optionally, for
example to connect the R&S FSV/A to a PC for remote control. The device con-
nector requires R&S FSV3-B114.
All USB connectors support standard 2.0.
5.2.5 Aux. Port
The 9-pole SUB-D male connector provides control signals for
controlling external devices. The voltage levels are of the TTL type
(max. 5 V).
Short-circuit hazard
Always observe the designated pin assignment. A short-circuit can damage
the port.
5.2.6 Aux. Control
The 9-pole SUB-D female connector allows the R&S FSV/A to
receive control signals from a controlling external device, such as
an external generator. The voltage levels are of the TTL type
(max. 5 V).
Rear Panel View
To Next Page
Loading...
