Roland BR-800 - Adjusting the Display Contrast

128
Adjusting the Display Contrast
Depending on the location in which the BR-800 is placed or
the conditions of use, you might find the display difficult to
read. If so, proceed as follows to adjust the display’s
contrast.
1
Press the [MENU] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “SYSTEM,” and press the [ENTER] button.
3
Use the CURSOR [ ] [ ] buttons to move the
cursor to “LCD CONTRAST,” and use the dial to
adjust the contrast.
D_System_LCD.eps
Range: 1–16
4
Press the [EXIT] button a number of times to return to
the play screen.
BR800_e.book 128 ページ ２０１０年３月２日 火曜日 午後６時４０分