Roland BR-800 - Playing Patterns

93
EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
Playing an Arrangement
Here’s how to select and play one of the internal
arrangements.
1
Press the [RHYTHM] button.
The [RHYTHM] button will light, indicating that
Rhythm is on.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “TYPE.”
3
Turn the dial to select “ARRANGE.”
4
Use the CURSOR [ ] [ ] buttons to move the
cursor to “ARRNG.”
5
Use the CURSOR [ ] [ ] buttons and the dial to
choose the arrangement that you want to play.
D_Rhythm_Arrange.eps
6
Press the [EXIT] button a number of times to return to
the play screen.
7
Press the [ZERO] button.
You will return to the beginning of the song.
8
Press the [PLAY] button.
The recorder will begin playing, and the selected
arrangement will also play.
9
Use the [RHYTHM] fader and the [MASTER] fader to
adjust the volume appropriately.
10
To stop playback, press the [STOP] button.
Setting
Explanation
P01–P50
Preset arrangements 1–50
S01–S05 Song arrangements 1–5
When the BR-800 is shipped from the factory, the
song arrangements (S01–S05) do not contain data,
so nothing will play even if you select them.
BR800_e.book 93 ページ ２０１０年３月２日 火曜日 午後６時４０分