Roland BR-800 - Loop Recording; Playback

EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
41
Recording
Loop recording is a function that copies the recorded data
when you stop recording, making it occupy approximately
200 measures.
By using Loop recording you can easily create looped
phrases that repeat the same phrase a number of times.
fig.looprec-e.eps
1
Press the desired track 1–7/8 [REC] button a number
of times to make track 1–7/8 [REC] button blink.
fig.LoopRec.eps
2
Record as described in “Recording” (p. 40).
When recording ends, the recorded data will be copied
so that it occupies approximately 200 measures.
1
Press the [ZERO] button.
The time location of the song will return to 00:00:00-
00:0.
2
Press the [PLAY] button.
The [PLAY] button will light green, and playback will
begin.
You can use the track faders to adjust the playback
volume of each track.
3
To stop playback, press the [STOP] button.
Loop Recording
Stop recording
Start recording
Approximately
200 measures
Blinking
Playback
BR800_e.book 41 ページ ２０１０年３月２日 火曜日 午後６時４０分