Roland BR-800 - Copying an Arrangement

100
Creating an Original Arrangement
If you want to slightly modify a preset arrangement, or
create a variation of an existing arrangement, you can do so
by copying it as a song arrangement and then editing the
copy.
1
Press the [RHYTHM] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “TYPE.”
3
Turn the dial to select “ARRANGE.”
4
Use the CURSOR [ ] [ ] buttons to move the
cursor to “ARRNG.”
5
Use the CURSOR [ ] [ ] buttons and the dial to
select the copy-source arrangement (P01–P50, S01–05).
6
Use the CURSOR [ ] [ ] buttons to move the
cursor to “EDIT,” and press [ENTER].
7
Use the CURSOR [ ] [ ] buttons to move the
cursor to “COPY,” and press the [ENTER] button.
The ARRANGE COPY screen will appear.
D_Arrange_Copy.eps
8
Use the dial to select the copy-destination song
arrangement (S01–S05).
9
Press the [ENTER] button.
The copy confirmation screen will appear.
D_Arrange_Erase_Sure.eps
10
Press the [ENTER] button once again.
The screen will indicate “Keep power on!” and the
copy will be executed.
11
Press the [EXIT] button a number of times to return to
the play screen.
Copying an Arrangement
You can’t copy to a preset arrangement.
BR800_e.book 100 ページ ２０１０年３月２日 火曜日 午後６時４０分