Roland BR-800 - Erasing an Arrangement

EditingMasteringUsing USBConvenient
Functions
Appendixes Quick StartGetting Ready
to Record
Recording/
Playback
Using
Effects
Using
Rhythm
101
Creating an Original Arrangement
Here’s how to erase step 2 and all following steps of the
song arrangement.
Step 1 will remain without being erased, and will be set to
“Metro” (metronome).
1
Press the [RHYTHM] button.
2
Use the CURSOR [ ] [ ] buttons to move the
cursor to “TYPE.”
3
Turn the dial to select “ARRANGE.”
4
Use the CURSOR [ ] [ ] buttons to move the
cursor to “EDIT,” and press the [ENTER] button.
5
Use the CURSOR [ ] [ ] buttons to move the
cursor to “ERASE,” and press the [ENTER] button.
The ARRANGE ERASE screen will appear.
D_Arrange_Erase.eps
6
Use the dial to select the song arrangement (S01–S05)
that you want to erase.
7
Press the [ENTER] button.
A confirmation message will appear.
D_Arrange_Erase_Sure.eps
8
If you’re sure that you want to erase the arrangement,
press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
* The screen will indicate “Keep power on!” and the contents
of the arrangement will be erased.
9
Press the [EXIT] button a number of times to return to
the play screen.
Erasing an Arrangement
You can’t erase a preset arrangement.
BR800_e.book 101 ページ ２０１０年３月２日 火曜日 午後６時４０分