Adding Reverberation to the Sound (Digital Reverb)
The CPM-300 offers four types of internal digital reverb.
Reverb Mode (Reverb Types)
●ECHO :This is an echo effect perfect for karaoke.
●HALL :This reverb simulates the reverberation found in concert halls.
●STAGE:This simulates the reverberation you hear on a stage.
●ROOM :This simulates the reverberation found in smaller rooms.
Operating the Digital Reverb
1.Select the Reverb mode.
2.Set the SEND knobs to 0 (12 o'clock position) on any channel on which reverb is to be added to the sound.
3.Rotate the SEND knob (Master Section) to adjust the level of the signal sent to the internal digital reverb.
4.Rotate the LEVEL knob to adjust the overall reverb level.
5.Rotate the TIME knob to adjust the reverb time.
6.Readjust the SENS knobs, SEND knobs, and faders on each channel as needed.
If you have a mic connected, proceed to "Eliminating Feedback (Anti-Feedback Function)" (→ p. 14).
To Next Page
Loading...
