Specifications
1. Mixer Section
●Frequency Responce:
20 Hz—20 kHz +1/-2 dB (Sens : min)
●Total Harmonic Distortion:
0.1 % or less (sens : min, 20 Hz—20 kHz, rated output)
●Noise Level:
(Input 150 Ω terminated, IHF-A Weighted typ.)
◆ Equivalent input Noise Level:
-120 dBm
◆ Residual Noise:
-89 dBm (all fader : min)
-72 dBm (master fader : max)
(all channel fader : min)
-72 dBm (master fader : max)
(all channel fader : nominal)
(all sens : min)
-49 dBm (master fader : max)
(all channel fader : nominal)
(all sens : max)
●Crosstalk:
-70 dB or less (1 kHz between channels)
-60 dB or less (1 kHz between L and R)
●Equalizer:
HIGH EQ: ±15 dB (12 kHz shelving type)
LOW EQ: ±15 dB (80 Hz shelving type)
●Digital Reverb:
Sampling Frequency: 48 kHz
Internal Signal Processing: 24 bits
2. Power Amplifier Section
●Rated Output:
100 W x 2 (Stereo, 8 Ω load, 1 kHz, 0.1 % or less THD)
150 W x 2 (Stereo, 4 Ω load, 1 kHz, 0.1 % or less THD)
●Recommended Load Impedance:
4 Ω or greater (STEREO)
●Frequency Response:
20 Hz—50 kHz (+0/-1 dB 1W/8 Ω)
●Total Harmonic Distortion:
0.05 % or less (Stereo, 8 Ω load, 1 kHz, 50 W)
●S/N Ratio:
100 dB or greater (amp in 150 Ω terminated, IHF-A
Weighted)
3. Others
●Power:
AC 117/230/240 V (50/60 Hz)
●Power Consumption:
150 W (AC 117/230/240 V)
●Dimensions:
375 (W) x 307 (D) x 131 (H) mm
14-13/16 (W) x 12-1/8 (D) x 5-3/16 (H) inches
●Weight:
6.0 kg / 13 lb 4 oz
●Accessories:
Owner's Manual
* 0 dBm = 0.775 Vrms
* In the interest of product improvement, the specifications and/or
appearance of this unit are subject to change without prior notice.
20
To Next Page
Loading...
