WARNING
Never attempt to cut magnesium or any
other such ammable material.
Fire may occur during cutting.
Keep open flame away from the work
area.
Cutting waste may ignite. Powdered material is
extremely ammable, and even metal material
may catch re.
When using a vacuum cleaner to take up
cutting waste, exercise caution to prevent
re or dust explosion.
Taking up fine cuttings using an ordinary
vacuum cleaner may cause danger of re or
explosion. Check with the manufacturer of the
vacuum cleaner. When the safety of use can-
not be determined, clean using a brush or the
like, without using the vacuum cleaner.
CAUTION
Wear dust goggles and a mask. Wash
away any cutting waste remaining on the
hands.
Accidentally swallowing or inhaling cutting
waste may be hazardous to the health.
The cutting waste or workpiece may catch re or pose a health hazard.
Danger of pinching, entanglement, and burns.
WARNING
Never attempt operation while wearing
a necktie, necklace, loose clothing, or
gloves. Bind long hair securely.
Such items may become caught in the ma-
chine, resulting in injury.
Securely fasten the cutting tool and work-
piece in place. After securing in place,
make sure no wrenches or other articles
have inadvertently been left behind.
Otherwise such articles may be thrown from
the machine with force, posing a risk of in-
jury.
WARNING
Exercise caution to avoid being pinched or
becoming caught.
Inadvertent contact with certain areas may
cause the hand or ngers to be pinched or
become caught. Use care when performing
operations.
Caution: cutting tool.
The cutting tool is sharp. To avoid injury, ex-
ercise caution.
Caution: high temperatures.
The cutting tool and spindle motor become hot.
Exercise caution to avoid re or burns.
To Next Page
Loading...
