Roland GRAND - Specifying the Key Range (RangeSet)

45
Customizing the V-Piano Grand’s Sounds
Press the [F1 (RangeSet)] button to specify the key(s) that you want
to edit.
To edit the setting of an individual key
1.
Press the [F1 (RangeSet)] button.
2.
Play the key whose setting that you want to edit.
3.
Use the [Value] dial to edit the setting.
4.
Press the [F1 (RangeSet)] button once again to return to
the parameter setting screen.
To edit the setting of multiple keys
simultaneously
1.
Press the [F1 (RangeSet)] button.
2.
Hold down two keys to specify the desired range.
3.
Use the [Value] dial to edit the setting.
The setting will be changed for the range between the two keys you
specified.
Beyond that range, settings will be made automatically to create a
smooth transition.
4.
Press the [F1 (RangeSet)] button once again to return to
the parameter setting screen.
If you play three keys simultaneously or hold down the
damper pedal and play three keys...
The values will not be edited for the keys at the two ends of the
range; the value will be edited for the center key.
Settings will be made automatically to create a smooth transition
between the center key and the two ends of the key range.
Specifying the Key Range (RangeSet)
V-Piano-Grand_e.book 45 ページ ２０１１年２月１０日 木曜日 午後１２時４分