58
Detailed Settings for Various Functions (Utility Screen)
8 Visual Control Group
9. Initialize Group
10. SONG Group
Refer to “Playing Songs and Recording Your Performances” (p. 51).
11 Setup Write Group
Refer to “Assigning a Name to a Setup and Saving It” (p. 49).
fig.Util03.eps
The following parameters are not saved in System memory or
Setup memory. They will return to the default settings when
you power-off the V-Piano Grand.
Tone Button Mode
Local Switch
Leave the USB Driver at the GENERIC setting. If you change this
to ORIGINAL, you’ll need dedicated drive software in order to
connect the V-Piano Grand to your computer. For more about
the dedicated driver software, refer to the Roland website.
Roland website: http://www.roland.com/
Parameter
Page’ Stored in...
Switch
p. 71
SYSTEM
Mode p. 71
SYSTEM
Tx Channel p. 71
SYSTEM
Key Range p. 71
SYSTEM
Local Switch p. 71
SYSTEM
Parameter
Page’
Delete User Tone
p. 71
Factory Reset All p. 72
Saving parameters
Different parameters are saved in different locations (Tone,
Setup, or System). Tones and the parameters saved in a Setup
are not memorized until you save them to a Tone or to a Setup.
Saving parameters stored in System memory
Refer to “Saving the System Parameters” (p. 56).
Saving parameters stored in a Setup
Refer to “Assigning a Name to a Setup and Saving It” (p. 49).
Saving parameters stored in a Tone
Refer to “Saving a Tone You’ve Customized” (p. 42).
System Settings (1. System)
Parameter Value Description
Master Tune
415.3–466.2 (Hz)
Changes the reference pitch of the
V-Piano Grand.
Temperament
Changes the temperament (tuning method).
EQUAL Equal
JUST MAJOR Just major
JUST MINOR Just minor
PYTHAGOREAN Pythagorean
KIRNBERGER Kirnberger
MEANTONE Meantone
WERCKMEISTER Werckmeister
ARABIC Arabic
Temperament
Key
C, C#, D, Eb, E, F,
F#, G, G#, A, Bb,
B
Specifies the tonic of the
temperament (tuning method).
Master
Volume
0–127
Adjusts the volume of the entire
V-Piano Grand.
Output Gain -12–+12 (dB) Sets the overall volume.
GM2/WAV
Volume
0–127
Adjusts the volume of SMF music
file, audio data, and the input.
GM2/WAV
Speaker Out
OFF, ON
Turn this “OFF” if you don’t want
sound from GM2, Wav, or the input
to be heard through the speakers.
This allows you to listen to the
sound of the piano from the V-
Piano Grand itself, while using
external speakers to listen to the
accompaniment.
EQ Mode SETUP, SYSTEM
Equalizer settings can be saved
within each setup. When you
switch setups, this setting specifies
whether the equalizer settings will
change to the settings saved in
that setup (SETUP) or will not
change (SYSTEM).
V-Piano-Grand_e.book 58 ページ ２０１１年２月１０日 木曜日 午後１２時４分
To Next Page
Loading...
