Roland GRAND - Restoring the Factory Settings (9. Initialize)

71
Detailed Settings for Various Functions (Utility Screen)
fig.UtilVLINK02.eps
fig.UtilInit01.eps
Here’s how to delete a specific user tone.
1.
In the Initialize screen, turn the [Value] dial to select
“Delete User Tone,” and then press the [Enter] button or
the [F1 (ENTER)] button.
fig.UtilInit02.eps
2.
Turn the [Value] dial to select the user tone that you want
to delete.
fig.UtilInit03.eps
3. To delete the selected user tone, press the [F4 (EXECUTE)]
button.
A confirmation message will appear.
fig.UtilInit04.eps
If you decide to cancel without deleting, press the [F1 (CANCEL)]
button.
4.
To delete the user tone, press the [F4 (OK)] button.
The screen will indicate “Executing... Don’t Power OFF” while
the user tone is being deleted. Never turn off the power during
this time.
5.
When deletion is completed, press the [Exit] button to
return to the previous screen.
Visual Control Settings
Parameter
Value Description
Switch OFF, ON
Turns the Visual Control
functionality on/off.
Mode
MIDI Visual
Control,
V-LINK
Selects the type of Visual Control.
Tx Channel 1–16
Specifies the MIDI channel on
which MIDI messages will be
transmitted.
Key Range A0–C8
Selects the range of keys that will
be used as Visual Control
controllers. You can also specify
this range from the keyboard by
pressing the bottom key, then the
top key, and then [Enter] button.
Local Switch OFF, ON
Specifies whether the V-Piano
Grand will (ON) or will not (OFF)
produce sound when you play a
key in the specified Key Range.
Restoring the Factory Settings
(9. Initialize)
Deleting the User Tones (Delete User Tone)
V-Piano-Grand_e.book 71 ページ ２０１１年２月１０日 木曜日 午後１２時４分