Roland GRAND - Deleting a Setup File (Delete SETUP File); Copying a Setup File (Copy SETUP File)

66
Detailed Settings for Various Functions (Utility Screen)
Here’s how to delete a setup file that was previously saved in the V-
Piano Grand’s internal memory or in USB memory.
1.
In the File screen, turn the [Value] dial to select “Delete
SETUP File,” and then press the [Enter] button or the [F1
(ENTER)] button.
fig.UtilFileDel01.eps
2.
Press the [F1 (MEDIA)] button to specify the media that
contains the setup file.
3.
Turn the [Value] dial to select the setup file that you want
to delete.
fig.UtilFileDel02.eps
If you choose “ALL,” all setup files will be deleted.
4. To delete the selected file, press the [F4 (EXECUTE)]
button.
A confirmation message will appear.
fig.UtilFileDel02.eps
If you decide to cancel without deleting, press the [F1 (CANCEL)]
button.
5.
To delete the file(s), press the [F4 (OK)] button.
Never turn off the power while a file is being deleted.
6.
When deletion is completed, press the [Exit] button to
return to the previous screen.
Here’s how to copy a setup file from the V-Piano Grand’s internal
memory to USB memory (sold separately).
You can also copy a setup file from USB memory to the V-Piano
Grand’s internal memory.
1.
In the File screen, turn the [Value] dial to select “Copy
SETUP File,” and press the [Enter] button or the [F1
(ENTER)] button.
fig.UtilFileCop01.eps
2.
Press the [F1 (DEST)] button to specify how copying is to
occur.
3.
Turn the [Value] dial to select the setup file(s) to be
copied.
fig.UtilFileCop02.eps
If you choose “ALL,” all setup files will be copied.
4.
To copy the selected file(s), press the [F4 (EXECUTE)]
button.
While files are being copied, the screen will indicate
“Executing...” Never turn off the power during this time.
If a file of the same name already exists, the confirmation
message “Overwrite OK?” appears. If you want to overwrite the
existing setup file, press the [F4 (OK)] button. If you want to
cancel the copy, press the [F1 (CANCEL)] button.
5. When copying is completed, press the [Exit] button to
return to the previous screen.
Deleting a Setup File (Delete SETUP File)
Value
Media
INT
V-Piano Grand’s internal memory
USB USB memory connected to the USB Memory connector
Copying a Setup File (Copy SETUP File)
Value
Description
INT → USB
Copies a setup file from the V-Piano Grand’s internal
memory to USB memory.
USB → INT
Copies a setup file from USB memory to the V-Piano
Grand’s internal memory.
V-Piano-Grand_e.book 66 ページ ２０１１年２月１０日 木曜日 午後１２時４分