EasyManua.ls Logo

Roland Juno-Stage - Detailed Settings for Piano Mode

Roland Juno-Stage
256 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
116
Chapter 8. Detailed Editing for Patches
You should also take a look at the related information in “Playing in Piano Mode ([PIANO MODE])” (p. 25) in the Quick Start.
This chapter explains the more detailed settings that you can make in Piano mode.
The PIANO MODE Screen
When you press [PIANO MODE] so it’s lit, the PIANO MODE screen will appear.
Use the cursor buttons to select a parameter, and use the VALUE dial or [DEC] [INC] to edit the value.
The [2]–[7] buttons located below the display will execute the functions shown in the bottom line of the screen.
If you press [PIANO MODE] so its illumination is turned off, or if you press [7 (EXIT)] or [EXIT], you will exit Piano mode and enter Patch mode.
If you select [2 (AC.PIANO)]
fig.disp-acpiano.eps
If you select [3 (EL.PIANO)]
fig.disp-elpiano.eps
Detailed Settings for Piano Mode
Indication
Content
Lid State
Adjusts the degree to which the lid is open (p. 117).
Resonance
On an acoustic piano, pressing the damper pedal will allow the strings of notes other than the keys you played to
resonate sympathetically, creating a rich and spacious resonance. This parameter adjusts the degree of resonance.
[3 (EL.PIANO)]
Selects settings for playing electric piano.
[5 (TOUCH)]
Adjusts the keyboard touch (p. 117).
[6 (LIST)]
Displays a list of the patches you can select in Piano mode.
PIANO PATCH LIST screen
[7 (EXIT)]
Exits Piano mode.
Indication
Content
EFFECT
Makes effect settings (p. 118). The parameters you can edit will depend on the effect that is selected.
[2 (AC.PIANO)]
Selects settings for playing acoustic piano.
[5 (TOUCH)]
Adjusts the keyboard touch (p. 117).
[6 (LIST)]
Displays a list of the patches you can select in Piano mode.
PIANO PATCH LIST screen
[7 (EXIT)]
Exits Piano mode.
Keep in mind when using Piano mode
Patch editing is done in Patch mode. Pressing [EDIT] will take you to Patch mode.
If you wish to use a hold pedal, we recommend that you use a Roland DP-10. The DP-10 will allow you to adjust the resonance of the
sound by the depth to which you press the pedal.
Patch Category Patch Name
Patch Category
Effect Name
Patch Name
JUNO-STAGE_e.book 116 ページ 2008年10月17日 金曜日 午後12時27分

Table of Contents

Related product manuals