Roland Juno-Stage - Creating Your Own Chord Forms; Saving the Chord Forms You Have Created (WRITE)

65
Chapter 3. Versatile Performance Functions
The instrument already provides a large number of chord forms from which
you can select. However, you are not limited to these, since you can freely
create your own chord forms.
1. Press [CHORD MEMORY] so it’s lit. Alternatively, hold down
[SHIFT] and press [CHORD MEMORY].
The CHORD MEMORY screen appears.
By holding down [SHIFT] and pressing [CHORD MEMORY], you
can access the CHORD MEMORY screen without turning the
chord memory function on/off.
2. Use the VALUE dial or [DEC] [INC] to select a chord form.
3. Press [6 (EDIT)].
The CHORD MEMORY EDIT screen shown below will appear.
4. Use the keyboard to input the chord that you want to play.
When you press a key, the note will be added in the screen.
• If you input a note by mistake, press [4 (DELETE)]. You can
also erase a note you input by pressing the same key.
• If you want to erase all notes, press [3 (ALL DEL)].
• You can press [2 (PREVIEW)] to hear the chord that you are
inputting.
5. When you have finished, press [6 (EXIT)].
You will return to the CHORD MEMORY screen.
The Chord Forms you create are temporary; they are deleted as soon
as you turn off the power or select some other Chord Form. If you
want to keep a Chord Form you have made, save it to the JUNO-
STAGE’s user memory.
In Performance mode, you can save chord forms for each
performance (p. 133). Chord forms cannot be saved in patches.
1. In the CHORD MEMORY EDIT screen, create a chord form.
2. Press [7 (WRITE)].
The CHORD NAME screen appears.
3. Assign a name to the Chord Form.
For details on assigning names, refer to p. 44.
4. When you have finished inputting the name, press [7 (WRITE)].
A screen will appear, allowing you to select the write-destination
Chord Form.
5. Use the VALUE dial, [DEC] [INC], or [ ] [ ] to select the write
destination.
6. Press [7 (WRITE)].
A message will ask you for confirmation.
To cancel, press [6 (CANCEL)].
7. To save the Chord Form, press [7 (EXEC)].
Never switch off the JUNO-STAGE while data is being saved.
Creating Your Own Chord Forms
Saving the Chord Forms You Have Created
(WRITE)
JUNO-STAGE_e.book 65 ページ ２００８年１０月１７日 金曜日 午後１２時２７分