Selecting Sounds
■ QUICK START
33
fig.lever.eps
While playing the keyboard, you can lower the pitch by moving the lever to the left, or raise the pitch by moving
the lever to the right. This is called “pitch bend.”
Pushing the lever away from yourself will apply vibrato. This is called “modulation.”
By moving the lever to left or right while pushing it away from yourself, you can apply both effects simultaneously.
fig.panel-trans.eps
You can change the pitch of the currently selected sound in steps of one octave. This is called the “octave shift”
function.
fig.disp-octvshift.eps
Press OCTAVE [DOWN] or [UP].
Pressing [DOWN] will lower the pitch one octave, and
pressing [UP] will raise it one octave.
You can change the pitch in a range of three octaves
down (-3) to three octaves up (+3).
A setting window will open when you press one of these
buttons, and will close a short time after you release the
button.
If the value is other than “0,” the OCTAVE [DOWN] or
[UP] indicator will light.
Modifying the Sound in Real Time
Using the Pitch Bend/Modulation Lever to Modify
the Sound
Pitch bend Modulation
Changing the Pitch in Steps of an Octave
(OCTAVE [DOWN] [UP])
JUNO-STAGE_e.book 33 ページ ２００８年１０月１７日 金曜日 午後１２時２７分
To Next Page
Loading...
