75
Chapter 4. Using the Song Player
RHYTHM PATTERN Screen
fig.disp-r-ptn.eps
From the RHYTHM GROUP screen, hold down [SHIFT] and press [3
(RHY PTN)] to access the RHYTHM PATTERN screen.
Use the cursor buttons to move the cursor to the parameter you want to
edit, and use the VALUE dial or [DEC] [INC] to edit its value.
The [2]–[7] buttons located below the display will execute the
functions shown in the bottom line of the screen.
Press [2 (RHY GRP)] or [EXIT] to return to the RHYTHM GROUP screen.
Function Button Operations
Editing a Rhythm Pattern
Parameter
Values
Explanation
(Rhythm
Pattern)
U001–256
(user),
P001–256
(preset)
This selects the rhythm’s basic playing
style
Grid
1/4,
1/8,
1/8L,
1/8H,
1/12,
1/16,
1/16L,
1/16H,
1/24
This specifies the time signature of the
rhythm pattern and the amount of “shuffle”
This specifies the note value
considered as “one grid section,” and
the amount of “shuffle” (none, weak,
or strong)
1/4:
Quarter note
(one grid section = one beat)
1/8:
Eighth note
(two grid sections = one beat)
1/8L:
Eighth note shuffle Light
(two grid sections = one beat, with a
light shuffle)
1/8H:
Eighth note shuffle Heavy
(two grid sections = one beat, with a
heavy shuffle)
1/12:
Eighth note triplet
(three grid sections = one beat)
1/16:
Sixteenth note
(four grid sections = one beat)
1/16L:
Sixteenth note shuffle Light
(four grid sections = one beat, with a
light shuffle)
1/16H:
Sixteenth note shuffle Heavy
(four grid sections = one beat, with a
heavy shuffle)
1/24:
Sixteenth note triplet
(six grid sections = one beat)
* The Grid setting is shared with the
arpeggio setting (p. 61).
Duration
30–120%,
Full
This specifies the duration of each note in
the rhythm pattern.
You can specify whether each note
will have a short duration for a
staccato feel, or an extended duration
for a tenuto feel.
30–120:
For example, if you set this
to “30,” the duration of a note in the
grid (or if notes in the grid are
connected by a tie, the duration of
the last note) will be 30% of the note
value specified by the grid type.
Full:
Even if consecutive grid
sections are not connected by a tie,
the note will continue to sound until
the next occurrence of the same
note.
* The Duration setting is shared with the
arpeggio setting (p. 61).
* This will have no effect if Tone Env
Mode (p. 124) is set to “NO-SUS.”
Velocity
1–127
This specifies the loudness of the notes in
the rhythm pattern.
Accent
0–100
This specifies the strength of the accents in
the rhythm pattern.
If this is set to “100,” accents will be
added to the notes according to the
velocities specified for the notes in the
rhythm pattern. If this is set to “0,” all
notes will be sounded at a fixed
velocity.
Function Button Content
[2 (RHY GRP)]
Displays the RHYTHM GROUP screen (p. 77).
[3 (RHY PTN)]
(The current page)
[5 (PREVU)]
Each time you press this button, the check mark
will be added or removed. When you add a
check mark, the selected rhythm pattern will
play.
[6 (PTN EDIT)]
Allows you to edit a rhythm pattern.
➝
RHYTHM PATTERN EDIT screen (p. 76)
[7 (WRITE)]
Saves the rhythm pattern (p. 78).
Parameter
Values
Explanation
JUNO-STAGE_e.book 75 ページ ２００８年１０月１７日 金曜日 午後１２時２７分
To Next Page
Loading...
