Roland Juno-Stage - Chapter 11. Other Settings; Saving User Data to USB Memory; Types of Data that can be Saved; Saving Data to USB Memory (User Backup)

144
Chapter 11. Other Settings
You can save system settings or user data to USB memory.
Connect your USB memory after you’ve turned the JUNO-STAGE’s power on. Never disconnect the USB memory while the power is turned on.
When you save settings from the JUNO-STAGE to USB memory, the
following settings are saved.
• User patches (rhythm sets)
• User performances
• Favorites
• User arpeggios
• User chord memory
• User rhythm patterns
• User rhythm groups
• MIDI Controller mode settings
• Patch first selected in Piano mode
• System settings
Here’s how to save user data to USB memory. This operation is called
“User Backup.”
Use USB memory sold by Roland. We cannot guarantee correct
operation if other products are used.
1. Press [MENU].
The Top Menu window will appear.
2. Use [ ] [ ] to select “4. Utility,” and press [ENTER].
The UTILITY MENU screen will appear.
3. Use the cursor buttons to select “User Backup,” and press
[ENTER].
The following screen will appear.
fig.disp-.eps
4. Press [7 (EXEC)].
If you decide to cancel, press [6 (CANCEL)].
When the backup has been completed, you will return to the
UTILITY MENU screen.
Here’s how to restore backed-up user data from USB memory into the
JUNO-STAGE. This operation is called “User Restore.”
All user data will be rewritten when you execute the User Restore
operation. If the JUNO-STAGE contains important data that you
want to keep, you must save it to a separate USB memory device
before you execute User Restore.
1. Press [MENU].
The Top Menu window will appear.
2. Use [ ] [ ] to select “4. Utility,” and press [ENTER].
The UTILITY MENU screen will appear.
3. Use the cursor buttons to select “User Restore,” and press
[ENTER].
The following screen will appear.
fig.disp-.eps
4. Press [7 (EXEC)].
If you decide to cancel, press [6 (CANCEL)].
When the restore operation has been completed, the following
screen will appear.
fig.disp-.eps
5. Turn the power of the JUNO-STAGE off, then on again.
Saving User Data to USB Memory
Types of Data that can be Saved
Saving Data to USB Memory (User Backup)
Restoring Saved Data from USB Memory
Back into the JUNO-STAGE (User Restore)
JUNO-STAGE_e.book 144 ページ ２００８年１０月１７日 金曜日 午後１２時２７分