Roland Juno-Stage - TVF ENVELOPE

129
Chapter 9. Detailed Settings for a Rhythm Set
TVF ENVELOPE
Parameters indicated by ( ) can be edited via ZOOM EDIT (p. 120).
Parameter
Value Explanation
F-Env Depth
Env Depth
-63–+63
Depth of the TVF envelope
Higher settings will cause the TVF envelope to produce greater change. Negative (-) settings
will invert the shape of the envelope.
F-Env V-Curve FIX, 1–7
Curve that determines how keyboard playing dynamics (velocity) will affect the TVF envelope
Set this to “FIX” if you don’t want the TVF Envelope to be affected by the keyboard velocity.
F-Env V-Sens -63–+63
Specifies how keyboard playing dynamics will affect the depth of the TVF envelope.
Positive (+) settings will cause the TVF envelope to have a greater effect for strongly played
notes, and negative (-) settings will cause the effect to be less.
F-Env T1 V-Sens -63–+63
This allows keyboard dynamics to affect the T1 of the TVF envelope.
If you want T1 to be speeded up for strongly played notes, set this parameter to a positive (+)
value.
F-Env T4 V-Sens -63–+63
Use this parameter when you want key release speed to affect the T4 value of the TVF envelope.
If you want T4 to be speeded up for quickly released notes, set this parameter to a positive (+)
value.
F-Env Time 1–4
Time 1–4
0–127
TVF envelope times (T1–T4)
Higher settings will lengthen the time until the next cutoff frequency level is reached.
F-Env Level 0–4
Level 0–4
0–127
TVF envelope levels (L0–L4)
Specify how the cutoff frequency will change at each point, relative to the Cutoff Frequency
value.
ZOOM
ZOOM
1234567
ZOOM
ZOOM
T1 T2 T3 T4
L3
L1
L0
L2 L4
Note off
Cutoff
Frequency
TVF Envelope
Time
Note on
JUNO-STAGE_e.book 129 ページ ２００８年１０月１７日 金曜日 午後１２時２７分