137
Chapter 10. Detailed Editing for Performances
[5 (DB EXP)]
Refer to the system setting “[4 (ATV EXP)]” (p. 153).
[6 (DB SYN)]
Refer to the system setting “[3 (SYNTH)]” (p. 152).
CONTROL SW (PERF) Screen
fig.disp-ctrlsw.eps
In the CTRL SETTING (PERF) screen, press [7 (CTRL SW)] to access this screen.
Use the cursor buttons to select the parameter that you want to edit, and use the
VALUE dial or [DEC] [INC] to set the value.
When you’ve finished editing, press [7 (EXIT)]. You will return to the CTRL
SETTING (PERF) screen.
[2 (CTRL SW)]
For each patch assigned to a part, you can specify whether certain MIDI messages will be transmitted (on) or not (off).
[3 (EXT)]
Specifies the MIDI message that will be transmitted for each part.
Parameter
Value Explanation
P.B
OFF, ON (
✔
)
MIDI pitch bend message transmission on/off
Mod
MIDI modulation message transmission on/off
Hold
Transmission on/off for the control messages from a pedal connected to the HOLD PEDAL jack
Ctrl
Transmission on/off for the control messages from a pedal connected to the CONTROL PEDAL
jack
S1
Transmission on/off for the control messages from the [S1] button
S2
Transmission on/off for the control messages from the [S2] button
D Beam
Transmission on/off for the control messages from the D Beam
Parameter
Value Explanation
Bank Sel (MSB)
0–127, OFF
The MSB (control number 0) of the bank select number transmitted when you switch
performances.
Choose “OFF” if you don’t want to transmit this message.
* This message is not transmitted from parts whose Keyboard Switch is off.
Bank Sel (LSB)
0–127
The LSB (control number 32) of the bank select number transmitted when you switch
performances.
* This message is not transmitted from parts whose Keyboard Switch is off.
Prog
1–128, OFF
The program change number transmitted when you switch performances.
Choose “OFF” if you don’t want to transmit this message.
* This message is not transmitted from parts whose Keyboard Switch is off.
Level
0–127, OFF
The value of the volume change transmitted when you switch performances.
* This message is not transmitted from parts whose Keyboard Switch is off.
Pan
L64–0–63R, OFF
The value of the pan message transmitted when you switch performances.
Choose “OFF” if you don’t want to transmit this message.
* This message is not transmitted from parts whose Keyboard Switch is off.
JUNO-STAGE_e.book 137 ページ ２００８年１０月１７日 金曜日 午後１２時２７分
To Next Page
Loading...
