Roland KIWI-3P - TONE - DCO

22
TONE – DCO
Parameter Edit Location Values displayed on TONE lights
Range 16', 8', 4' A:1:1 DCO 1
A:2:4 DCO 2
1 = 16', 2=8', 3=4'
Wave Saw, Pulse, Square
Noise (DCO2 Only)
A:1:2 DCO 1
A:2:5 DCO 2
1 = Saw, 2= Pulse, 3=Square
4 = Saw + Pulse
5 = Saw + Square
6 = Saw + Pulse + Square
1 = Saw, 2= Pulse, 3=Square
4 = Saw + Pulse
5 = Saw + Square
6 = Saw + Pulse + Square
7 = Noise
DCO Coarse Tune
± 1 Octave
A:1:3 DCO1
A:2:6 DCO2
Range 0-127 (-1 Octave -> +1 Octave)
DCO 2 Fine Tune A:2:7 Range 0-127 (~-50 cents -> +50 cents)
DCO 1 LFO Modulation Depth
DCO 2 LFO Modulation Depth
A:1:4
A:2:8
Range 0-127
DCO 1 LFO Source
DCO 2 LFO Source
A:1:5
A:3:1
1 = LFO 1, 2 = LFO 2, 3 = LFO3
DCO 1 Env Modulation Depth
DCO 2 Env Modulation Depth
A:1:6
A:3:2
Range 0-127
DCO 1 Env Source
DCO 2 Env Source
A:1:7
A:3:3
1 = ENV 1, 2 = ENV 2, 3 = ENV 3
DCO 1 Pulse Width
DCO 2 Pulse Width
A:1:8
A:3:4
Range 0-127 (64=50%)
DCO 1 Pulse Width Modulation
DCO 2 Pulse Width Modulation
A:2:1
A:3:5
Range 0-127
This parameter is added to PW.
DCO 1 PWM Source
DCO 2 PWM Source
A:2:2
A:3:6
1 = ENV 1, 2 = ENV 3, 3 = LFO 2, 4 = LFO 3
DCO 1 Dynamics Depth
DCO 2 Dynamics Depth
A:2:3
A:3:7
Range 0-127
DCO Mix A:3:8 Range 0-127 (0=DCO1, 64 = 50/50, 127 = DCO2)
DCO Mix Env Level A:4:1 Range 0-127
DCO Mix Env Source A:4:2 1 = ENV 1, 2 = ENV 2, 3 = ENV 3
DCO Mix Dynamics Depth A:4:3 Range 0-127
DCO Cross Modulation A:4:4 1 = Off, 2 = Sync 1, 3 = Sync 2, 4 = Metal
Detune A:4:5 Range 0-127
Analog Feel A:4:6 Range 0-127
www.kiwitechnics.com Kiwi-3P Matrix Upgrade User Manual v1.2