31
Kiwi-3P CPU Board Install
Step 1) Opening the 3P - After removing the four screws located in the end panels and the 4 screws on the underside at the rear the top can be opened.
Step 2) Removing the main board. Remove the screws securing the keyboard from the underside of the JX-3P so the keyboard can be moved forward and give access to
the main board. Remove the 8 screws shown in Photo 1.
Photo 1 - Screw Locations in the JX-3P main board
Step 3) Remove the 6 cable plugs and turn the board over.
www.kiwitechnics.com 3P Matrix Upgrade User Manual v1.2
To Next Page
Loading...
