46
Continuous Controllers Second Third Notes
Start/Stop Arp $67 (103) $yy yy = $00-$3f (0-63) Arp Stopped
$40-$7f (64-127) Arp Playing
Start/Stop Seq $68 (104) $yy yy = $00-$3f (0-63) Seq Stopped
$40-$7f (64-127) Seq Playing
Mix ENV Source $69 (105) $yy yy = $00-$0f (0-15) ENV 1 Normal
$10-$1f (16-31) ENV 1 Inverted
$20-$2f (32-47) ENV 2 Normal
$30-$3f (48-63) ENV 2 Inverted
$40-$4f (64-79) ENV 3 Normal
$50-$7f (80-127) ENV 3 Inverted
Chorus Off/Auto/Manual $6a (106) $yy yy = $00-$3f (0-31) Chorus Off
$20-$5f (32-63) Chorus On Auto
$40-$7f (64-127) Chorus On Manual
Matrix 0 Level $6c (108) $00-$7f (0-127)
Matrix 1 Level $6d (109) $00-$7f (0-127)
Matrix 2 Level $6e (110) $00-$7f (0-127)
Matrix 3 Level $6f (111) $00-$7f (0-127)
Matrix 4 Level $70 (112) $00-$7f (0-127)
Matrix 5 Level $71 (113) $00-$7f (0-127)
Matrix 6 Level $72 (114) $00-$7f (0-127)
Matrix 7 Level $73 (115) $00-$7f (0-127)
Matrix 8 Level $74 (116) $00-$7f (0-127)
Matrix 9 Level $75 (117) $00-$7f (0-127)
Master Tune $76 (118) $00-$7f (0-127)
Program Change $77 (119) $yy yy = $00-$7f (0-127) Program Number
Note – this is only here because the BCR2000 is not able
to step programs using two buttons
All Sound off $78 (120) Stops all output immediately
All Notes off $7b (123) Stops all output immediately
Real Time Commands
Midi Clock $f8 (248) Midi Timing Clock
Start $fa (250) Start Sequence Play
Stop $fc (252) Stop Sequence Play
Midi Sysex Support
Function Transmitted Recognized Notes
Basic ID 1-16 1-16, Omni Set using Device ID in Global Variable S:B:4
Load O O
Dump O O
www.kiwitechnics.com Kiwi-3P Matrix Upgrade User Manual v1.2
To Next Page
Loading...
