47
Midi Sysex Data
Notes
$nn = Hexadecimal Data - Decimal data is in Brackets e.g. $0a (10)
Sysex Header
$f0 Sysex Start
$00 $21 $16 Kiwitechnics Manufacturers ID
$60 Kiwitechnics ID
$08 Kiwitechnics 3P Matrix ID
xx Command ID (see table 1.0)
$01 = Request Global Dump
$02 = Transmit/Receive Global Dump
$03 = Request Tone Edit Buffer Dump
$04 = Transmit/Receive Tone Edit Buffer Dump
$05 = Request Tone Dump
$06 = Transmit/Receive Tone Dump
$09 = Request Seq Dump
$0a = Transmit/Receive Seq Dump
$0d = Request Tone Parameter
$0e = Transmit/Receive Tone Parameter
$0f = Request Global Parameter
$10 = Transmit/Receive Global Parameter
$13 = Request Sequence Edit Buffer Dump
$14 = Transmit/Receive Sequence Edit Buffer Dump
Data Depending on command type (see table 1.0)
$f7 Sysex Footer
WARNING! Sysex dumps have the ability to put non valid settings into memory and few checks are made for validity. If the 3P becomes
unusable due to non valid data you will need to do a full restore of the 3P which will lose all saved memory.
www.kiwitechnics.com 3P Matrix Upgrade User Manual v1.2
To Next Page
Loading...
