Roland R-07 Reference Guide

9
Getting Ready
Formatting a microSD Card
“Formatting” is the process of preparing the microSD card for use.
If you’re using a microSD card other than the included one, you
must rst format the microSD card before it can be used with the
R-07.
NOTE
5 You must format the microSD card on the R-07 itself. A microSD
card formatted on a device other than the R-07 might not
work correctly in the R-07.
5 When you format a microSD card, all data on the card will be
erased.
1. Make sure that the microSD card you want to
format is inserted in the microSD card slot.
For details, refer to “Inserting a microSD Card” (p. 8).
2. Press [Menu] to access the “Menu” screen, use
[ ]/[ ] to select “SD Card,” and then press [ ].
MEMO
If you decide to cancel without formatting, press [MENU].
You will return to the previous screen.
3. Use [ ]/[ ] to select “Format,” and then press
[ ].
4. When the conrmation screen appears, use [ ] to
select “Yes” and then press [ ].
NOTE
Never remove the microSD card while the screen indicates
“Processing.” Doing so may destroy the memory area in the
microSD card.
When the screen indicates “Completed!” the formatting process is
nished.
5. Press [MENU] twice to return to the main screen.

Roland R-07 Specifications

General

Sample rate	96 kHz
Audio quality	24 bit
Frequency range	20 - 40000 Hz
USB 2.0 ports quantity	1
Product color	Black

Weight and Dimensions

Weight	150 g
Dimensions (WxDxH)	61 x 103 x 26 mm