44
Playing Back
You can use the R-44’s Internal speakers to monitor the sound without having to connect headphones or
other equipment.
fig.recording-1.eps
1
Press the [MENU] button.
The System Menu screen appears on the display.
fig.speaker-on.eps
2
Use the Cursor buttons [] [] to choose 3 Speaker,
and press the [ENTER] button.
The Speaker screen appears.
* The value in boldface is the default value.
* Note that sound will not be output from the internal speakers if headphones are connected. If you want to use the
internal speakers, you must disconnect the headphones.
* You cannot monitor with the internal speakers while recording. You will need to monitor through headphones.
* For more about system settings, refer to “System Setup” (p. 60).
Speaker Settings
Speaker Switch setting Output destination
ON
Internal speakers
Line output jacks
Digital output jack
Headphones
OFF
Line output jacks
Digital output jack
Headphones
R-44_e_new.book 44 ページ ２００８年５月１５日 木曜日 午後４時５３分
To Next Page
Loading...
Need help?
General
