45
Playing Back
After performing the steps described in “Connections Before Playback” (p. 41) and “Setup Before
Playback” (p. 43), proceed as follows.
1
Select the project that you want to play.
From the Main screen, press the [ENTER/FINDER]
button.
2
In the Finder screen that appears, use the Cursor
buttons [] [] or the [SCRUB/VALUE] dial
to select a project. For more about the Finder screen,
refer to “Manipulating a Project (Finder)” (p.
48).
3
Press the [PLAY] button.
The selected project will play.
4
Slowly turn the Monitor level knob to the desired
volume for listening.
* Projects with names beginning with “.” are ignored and are not shown.
* If Japanese (double-byte) characters are used in the project name, it will
not be displayed correctly. We recommend using file names that do not
include Japanese (double-byte) characters so that they are easy to
recognize.
* Projects whose filename extension is not. pjt or. wav will be ignored and will not be shown.
Playing Back
Normal Playback
1
2
3
2
2
R-44_e_new.book 45 ページ ２００８年５月１５日 木曜日 午後４時５３分
To Next Page
Loading...
