61
System Setup
You can use the same procedure to make the settings listed below. As an example, we will show how to
make Recording Setup settings.
1 Recording Setup
2 Player Setup
3 Speaker
4 Display Setup
5 System Setup
fig.recording-1.eps
1
Press the [MENU] button.
The System Menu screen is shown on the display.
fig.recording-2.eps
2
Use the Cursor buttons [ ] [ ] to choose 1 Recording
Setup
, and press the [ENTER] button.
The Recording Setup screen is shown.
3
Use the [SCRUB/VALUE] dial to choose the Input Select
value.
The setting is applied as soon as you select it.
You do not need to press the [ENTER] button.
fig.recording-3.eps
4
Use the Cursor buttons [ ] [ ] to select Rec Freq.
5
Use the [SCRUB/VALUE] dial to select the Rec Freq.
value.
6
In the same way, use the Cursor buttons [ ] [ ] and
the [SCRUB/VALUE] dial to select and set the remaining items.
7
When finished making settings, press the [EXIT] button.
You are returned to the System Menu screen.
8
Press the [EXIT] button again to return to the Main screen.
If you want to make other system settings, use the Cursor buttons [ ] [ ] to select the desired menu
item.
Example Operations
Recording Setup
R-44_e_new.book 61 ページ ２００８年５月１５日 木曜日 午後４時５３分
To Next Page
Loading...
Need help?
General
