Roland R-44

62
System Setup
fig.pj-name1.eps
1
Press the [MENU] button.
The System Menu screen is shown on the display.
fig.pj-name2.eps
2
Use the Cursor buttons [ ] [ ] to select 6 Date &
Time
, and press the [ENTER] button.
The Date & Time screen is shown.
fig.pj-name3.eps
3
Use the Cursor buttons [ ] [ ] [ ] [ ] and the
[SCRUB/VALUE] dial to set the date and time.
When finished making settings, press the [EXIT] button.
You are returned to the System Menu screen.
* If you decide to cancel, press the [EXIT] button.
4
Press the [EXIT] button again to return to the Main screen.
If you want to make other system related settings, use the Cursor buttons [ ] [ ] to select the desired menu
item.
Date & Time Settings
R-44_e_new.book 62 ページ ２００８年５月１５日 木曜日 午後４時５３分