155
Shortcut List
You can easily change settings for the following functions using a number of related buttons.
* “[A] + [B]” indicates that you are to hold down [A] and press [B].
You can easily call up Edit screens for related parameters for the following functions by holding
down [SHIFT] while pressing buttons, turning knobs, or operating other controllers.
* Example “Edit: Effects: Reverb Type” indicates the Effects’ Reverb Type parameter in Edit screen.
* 1: The INTERNAL zone settings are made while [EXTERNAL/INTERNAL] is set to OFF, the
EXTERNAL zone settings are made while [EXTERNAL/INTERNAL] is set to ON.
What to do
Operation Page
Switching Arpeggio Hold On and Off
[ARPEGGIO] + [CONTROL/ZONE LEVEL]
p. 96
Selecting Zone to Play Arpeggios
[ARPEGGIO] + ZONE SWITCH p. 96
Changing Transpose setting
[TRANSPOSE] + Key p. 42
Changing the Keyboard’s Split Point
[SPLIT] + Key
p. 39
Panel Lock
[EDIT] + [ENTER]
p. 55
Changing the MFX2 Source
MULTI EFFECTS [ON/OFF] + ZONE SWITCH
p. 86
Setting the Reverb/Chorus Amount for each Part
ZONE SWITCH + REVERB or CHORUS knob
p. 71
What to do
Operation Page Page
Switching the Damper Pedal’s On/Off
[SHIFT] + Damper Pedal
Zone Info: Damper Pedal Switch
p. 70
Assigning Functions to Pedals
[SHIFT] + FC1/2
Edit: Control: FC1/FC2
p. 85
Setting the V-Link
[SHIFT] + [V-LINK]
Edit: V-Link
p. 97
Setting the Sound Control
[SHIFT] + [SOUND CONTROL]
Edit: Sound Control
p. 88
Selecting the Chorus/Delay Type
[SHIFT] + [CHORUS/DELAY]
Edit: Effects: Chorus Type
p. 88
Setting the Chorus Amount (*1)
[SHIFT] + CHORUS Knob Tone Info: Chorus Amount
p. 71
Selecting the Reverb Type
[SHIFT] + [REVERB]
Edit: Effects: Reverb Type
p. 87
Setting the Reverb Amount (*1)
[SHIFT] + REVERB Knob
Tone Info: Reverb Amount
p. 71
Changing the [CONTROL] knob parame-
ter
[SHIFT] +
MULTI EFFECTS [CONTROL] Knob
Edit: Effects: MFX Control
p. 87
Changing the MFX Type
[SHIFT] + MULTI EFFECTS [ON/OFF]
Edit: Effects: MFX Type
p. 87
Changing the Rhythm Patterns
[SHIFT] + [RHYTHM/SONG]
Edit: Rhythm/Arpeggio:
Rhythm Pattern
p. 93
Changing the Arpeggio Style
[SHIFT] + [ARPEGGIO]
Edit: Rhythm/Arpeggio:
Arpeggio Style
p. 95
Selecting the Tone for each Zone (*1)
[SHIFT] + ZONE SWITCH
Zone Info: Tone
p. 68
Adjusting the Volume for each Zone (*1)
[SHIFT] + ZONE LEVEL Slider
Zone Info: Volume
p. 68
Assigning Functions to Sliders
[SHIFT] + [CONTROL/ZONE LEVEL]
Edit: Control: Slider Assign
p. 85
Loading SETUP Files
[SHIFT] + [SETUP]
Edit: File Utility/USB:
Load SETUP File
p. 90
Setting the Transposition for each Tone
(*1)
[SHIFT] + [TRANSPOSE]
Tone Info: Coarse Tune
p. 71
Setting the Key Range for each Zone (*1)
[SHIFT] + [SPLIT]
Zone Info: Key Range
p. 69
Turning the Controllers are used to con-
trol the Zone On and Off (*1)
[SHIFT] + Bender
Zone Info: Bender Sw
p. 70
[SHIFT] + Modulation
Zone Info: Modulation Sw
RD-700SX_e.book 155 ページ ２００６年３月２３日 木曜日 午後２時５２分
To Next Page
Loading...
