61
Using the RD-700SX As a Master Keyboard
The RD-700SX is equipped with two MIDI connectors and one USB connector.
You can select which MIDI OUT connector or USB connector is used for outputting
the signals for each individual zone.
fig.Q3-04p
1
Press [EXTERNAL/INTERNAL], getting the indicator to light.
The EXTERNAL screen appears.
If “OUT” doesn’t appear on screen, press CURSOR [ ] several times to display the
following screen.
fig.Q3-05g
2
Press CURSOR [ ]/[ ]/[ ]/[ ] to move the cursor, then press
[INC]/[DEC] to set the connector from which the MIDI messages of
each zone are to be output.
Selecting the MIDI Connector to Use for Output
(MIDI OUT Port)
Part
Parameter Settings Description
UP1 (UPPER1)
OUT
(MIDI OUT Port)
ALL,
1 (MIDI OUT 1),
2 (MIDI OUT 2),
USB
The RD-700SX’s per-
formance data is
transmitted from the
selected connector.
UP2 (UPPER2)
LW1 (LOWER1)
LW1 (LOWER2)
1
2
When Rec Mode is set to ON in
the Utility Rec Setting in Edit
mode, the EXTERNAL screen
as shown to the left is not
displayed. Set Rec Mode to
OFF when setting the MIDI
Transmit channel (p. 101).
RD-700SX_e.book 61 ページ ２００６年３月２３日 木曜日 午後２時５２分
To Next Page
Loading...
