Roland RD-700SX - Performing with the Keyboard; Piano Performances and Tone Selection

32
Performing with the Keyboard
Now, try performing with the piano.
With the RD-700SX, you can call up the optimal settings for piano performances with
the press of a single button.
You can also select your preferred tones and settings and store them to the
instrument’s buttons.
fig.Q1-03p
1
Press ONE TOUCH [PIANO] or [E.PIANO].
fig.Q1-04g
Pressing ONE TOUCH [PIANO] sets the entire keyboard to play with the piano
tone.
Pressing ONE TOUCH [E.PIANO] sets the entire keyboard to play with the electric
piano tone.
2
You can now press [F1] to switch the type.
Pressing [F1] toggles you between Types A and B.
fig.Q1-05g
Piano Performances (ONE TOUCH)
12
Pressing ONE TOUCH
[PIANO] or [E.PIANO]
restores all of the settings
except for the Piano Edit(p. 73)
or Electric Piano Edit(p. 76)
settings to their status at the
time the power was turned on.
If you want to preserve these
settings, record them to a
setup(p. 56).
You can use CURSOR [ ]/
[ ] in the ONE TOUCH
(PIANO) screen to adjust the
amount the grand piano lid is
opened.
With the RD-700SX, you can also make more detailed settings to make the sound
even better match your favorite piano performances. You can store a total of four
settings configurations, two each to [PIANO] and [E.PIANO].
Please refer to each as needed.
• Fine Adjustment of Piano Tones (Piano Edit) →p. 73
• Fine Adjustment of E.Piano Tones (E.Piano Edit) →p. 76
• Fine Adjustment of the Piano Touch Sense →p. 74
RD-700SX_e.book 32 ページ ２００６年３月２３日 木曜日 午後２時５２分