79
Detailed Settings for Each Function ([EDIT])
fig.05-01e
You can press [F1(WRITE)] to save following settings as
common settings to RD-700SX.
• 0. System
• 4. Sound Control
• 8. V-Link
However, following settings are not saved.
• V-Link On or Off
• Sound Control On or Off
Functions that affect the RD-700SX’s overall operating environment
are called “System functions.”
1.
Press [EDIT], getting the indicator to light.
The Edit Menu screen appears.
fig.05-02g
2.
Press CURSOR [ ] to select “0.System.”
3.
Press [ENTER] to display the Edit screen.
fig.05-03-1g
fig.05-03-2g
fig.05-03-3g
4.
Press CURSOR [ ]/[ ] to switch screens, and
press CURSOR [ ]/[ ] to move the cursor to
the parameter to be set.
5.
Press [INC]/[DEC] to set the value.
6.
When you have finished making the settings, press
[EDIT], extinguishing its indicator.
If you want to save this settings, press [F1(WRITE)]. Settings
saved in the RD-700SX are not deleted even when the power is
turned off. However, following settings are not memorized.
Device ID
→
p. 81
Setting Parameters
Edit Menu Screen
Edit Screen
Select a menu
Select an item
Switch screens
Change the value
(The number of Edit screen
pages may vary according
to the menu selected.)
:
Getting [EDIT]
indicator light
Extinguishing
[EDIT] indicator
Exit the Edit Mode
Enter the Edit Mode
You can input the value using
the TONE SELECT buttons, and
press [ENTER] to set the value.
Making System Settings
(System)
How to Make Settings
RD-700SX_e.book 79 ページ ２００６年３月２３日 木曜日 午後２時５２分
To Next Page
Loading...
