Other useful functions
53
Looping specific steps (step loop)
You can make a selected step or steps play back in a loop during pattern playback.
You can make more than one step play back in a loop at the same time.
1.
Press the [ø] (PLAY) button to start playback (the button lights up).
2.
Hold down the [SHIFT] button and press the [PATTERN] button.
The [PATTERN] button blinks, and the unit enters step loop mode.
3.
Keep pressing the step pads [1]–[16] that you want to play repeatedly.
The steps you selected play repeatedly.
4.
To exit, press the [PATTERN] button.
To Next Page
Loading...
