Other useful functions
58
Using the metronome
Configuring the metronome
Here’s how to change how the metronome plays and its volume.
1.
Hold down the [SHIFT] button and press pad [15] (MENU).
2.
Use the [TEMPO/VALUE] knob to select the parameters below, and then press pad [2] (ENTER).
(Metronome)
Turns on only when recording
Turns on during recording and playback
Sets the volume of the metronome.
Setting the length (the number of beats) of the count-in
Here’s how to set the length (the number of beats) of the count-in for recording.
1.
Hold down the [SHIFT] button and press pad [15] (MENU).
2.
Use the [TEMPO/VALUE] knob to select “Cnt.I”, and press pad [2] (ENTER).
Sets the length (the number of beats) of the count-in for recording.
The metronome or count-in click plays in quarter-note intervals.
The metronome timing is reset at the beginning of the pattern. (Ver. 1.02)
To Next Page
Loading...
