Roland S-1

Other useful functions
60
Using global delay/reverb
What’s global delay/reverb?
On this unit, you can select whether to control delay and reverb by using the pattern parameters or by using the system
parameters.
“Global delay/reverb” refers to using the system parameters to control the delay and reverb.
The global delay/reverb parameters are saved in the system parameters.
1. Hold down the [SHIFT] button and press pad [15] (MENU).
2. Use the [TEMPO/VALUE] knob to select “GL.d.r” (Global Delay/Reverb SW), and press pad [2] (ENTER).
3. Select either “OFF” or “On”.
Parameter
Value
Explanation
GL.d.r
(Global Delay/Reverb
SW)
OFF
The settings are saved per pattern, and the tail of the delay/reverb is muted while switching
patterns.
On
As the system settings are given priority, the tail of the delay/reverb continues to sound even
while you switch between patterns.
Both the delay and reverb parameters can be configured in the function page.
For details on the parameters, refer to “Creating sounds(P.12)” - “EFX section(P.26)”.