5
Use [INC/DEC] or the VALUE dial to select the kit that will be selected second.
6
In the same way, make settings for the third and subsequent kits.
fig.00-122
To delete an unwanted kit from a step, use [CURSOR] in the “CHAIN” page to select the kit, and then press
[F2 (DELETE)].
If you wish to add a kit between steps, press [F1 (INSERT)].
7
When you finish making the settings, press [EXIT].
You will return to the “DRUM KIT CHAIN” page.
fig.00-122a
In this page you can use [INC/DEC] to select drum kits in the specified order.
To turn off the Drum Kit Chain function, press [CHAIN] to make the button indicator go dark.
In addition, you can specify pads or foot switches that can be used to select drum kits easily, even while you
continue playing. For details refer to “Chapter 9. Operations using pads and foot switches” (p. 119) in the
“Advanced Use.”
To Next Page
Loading...
