■ Adjust the muffling (muting) and snare strainer tension
You can add muffling to the snare drum or adjust the tension of the snare strainer to reduce unwant-
ed overtones or resonances, creating a tighter sound. You can even turn the snares off!
fig.00-093
1
Press [INST], then press [F2 (EDIT)], and then press [F3 (MUFFLE)].
2
Strike the pad being used for the snare.
The snare setting page appear. Here, you can choose the muffling method and snare strainer ten-
sion.
fig.00-094
3
Use [CURSOR] to move the cursor to “Muffling.”
To Next Page
Loading...
