Roland V-Drums TD-50X - Repeatedly Playing a Specified Region (A-B Repeat)

19
Performing
MEMO
5
You can repeatedly play back an entire song or just one part.
5
You can make the click sound in time with the song by outputting
an audio le on the SD card as a click track (p. 21).
When transferring les from your computer to
an SD card
You can play back audio les that are saved either at the top
level or in a folder within the SD card.
* You can put up to 200 song les in a single folder.
* Keep the song length within one hour per le.
Reference
For details, refer to “SD card folder structure” (p. 53).
Audio les that can be played by the TD-50X
WAV le MP3
Format (extension) WAV (.wav) MP3 (.mp3)
Sampling frequency 44.1 kHz 44.1 kHz
Bit rate 16, 24-bit 64–320 kbps
* File names or folder names that contain more than 16
characters are not shown correctly. Files and folders using
double-byte characters are also not supported.
Repeatedly Playing a Specied Region
(A-B Repeat)
You can make a certain part of a song repeat.
* You cannot set the A-B repeat for the built-in songs of the drum
performances or the recorded songs (REC DATA).
A B
1. Select and play a song.
2. In the SONG screen, press the [F4] (A-B) button at the
location where you want to start repeating.
The character “A” appears.
MEMO
You can use the [
K
] (
x
) / [
J
] (
y
) buttons to move backward or
forward in ve-second steps. Hold down a button to fast-rewind or
fast-forward.
3. At the location where you want to stop repeating, press
the [F4] (A-B) button.
The character “B” appears, and the region of the song between “A”
and “B” plays repeatedly.
Press the [F4] (A-B RPT) button to return to normal playback.