35
Customizing the Kits
Comparing with or Reverting to the
Unedited Drum Kit
(SNAPSHOT)
You can temporarily save the currently-edited drum kit, and compare
it with the current settings or revert back to it (Snapshot).
Save temporarily
(STOCK)
Edit
Immediately
after selecting
drum kit
(UNDO)
Current drum kit
(CURRENT)
1. Select the drum kit that you want to edit.
When you select a drum kit, the data of the selected drum kit is
stored in “UNDO.”
2. When you want to temporarily save the drum kit
settings that you’re editing, press the [SNAPSHOT]
button.
The SNAPSHOT screen appears, and the current drum kit (CURRENT)
is selected.
3. Press the [F5] (SAVE) button.
The current drum kit settings are saved in STOCK.
MEMO
Press the [SNAPSHOT] button while holding down the [SHIFT]
button to save the current drum kit settings in STOCK without
switching to the SNAPSHOT screen.
4. Press the [EXIT] button to exit the SNAPSHOT screen,
and edit the drum kit.
* When you switch drum kits, the settings saved in STOCK are
deleted.
5. Press the [SNAPSHOT] button.
6. Use the [F1]–[F3] buttons to switch between the saved
drum kits, and play them to compare.
Button Explanation
[F1] (CURRENT) button Current drum kit settings
[F2] (STOCK) button Drum kit settings saved in STOCK
[F3] (UNDO) button
Settings immediately after selecting the
drum kit
7. To restore the current drum kit settings to the STOCK
settings or to the settings just after selecting the drum
kit, press the [F2] or [F3] button and select the drum kit
settings to restore.
If you want to continue with the current drum kit settings, press the
[KIT] button to return to the DRUM KIT screen.
8. Press the [F4] (RESTORE) button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
9. Select “OK,” and press the [ENTER] button.
The current drum kit settings return to the settings of the drum kit
that you selected in step 7.
10. Press the [KIT] button to return to the DRUM KIT screen.
To Next Page
Loading...
