Roland V-Drums TD-50X - Bulk Import of Audio Files Within a Folder (IMPORT ALL); Assigning a User Sample to an Instrument and Playing It

40
Customizing the Kits
5. Use the cursor buttons to select an audio le, and press
the [F5] (SELECT) button.
The USER SAMPLE IMPORT (DESTINATION) screen appears.
6. Use the cursor buttons to select the import-destination
number, and press the [F5] (IMPORT) button.
If you select a number in which data already exists, the message
“User Sample Exists!” appears. Select a number that contains no
data.
7. Press the [F5] (IMPORT) button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
8. Select “OK,” and press the [ENTER] button.
The audio le is imported.
Bulk Import of Audio Files Within a Folder
(IMPORT ALL)
1. Insert an SD card into the TD-50X (p. 10).
2. Hold down the [SHIFT] button and press the [SETUP]
button.
3. Press the PAGE [UP] button to display the topmost
page.
4. Press the [F1] (IMPORT) button.
The USER SAMPLE IMPORT screen appears.
5. Use the cursor buttons to select an audio le, and press
the [F1] (IMPORT ALL) button.
The name of the folder for bulk import and the rst number of the
import destination are shown.
* If there is already one or more user samples within the import
destination range, the message “User Sample Exists! Not Enough
Space to Import All” is displayed. Conrm that there are no existing
samples in the range, and then select a number.
6. Press the [F5] (IMPORT) button.
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
7. Select “OK,” and press the [ENTER] button.
The audio le is imported.
Assigning a User Sample to an Instrument
and Playing It
1. Press the [INSTRUMENT] button.
2. Press the PAGE [UP] button several times to display the
INSTRUMENT screen.
3. Press the [F1] (INST) button.
4. Select the pad to congure (p. 29).
5. Move the cursor to the Instrument category, and use
the [-] [+] buttons or the dial to select “USER SAMPLE.”
6. Turn the [R1] knob to select a user sample.
7. Press the [KIT] button to return to the DRUM KIT screen.
When you strike a pad to which the user sample is assigned, you
hear that user sample.
MEMO
5
You can adjust the sound of a user sample and apply eects to it in
the same way as for other Instruments.
&
“Editing Instruments (INSTRUMENT)” (p. 28)
&
“Applying Eects” (p. 33)
5
You can also assign a user sample to a sub-instrument.