Roland V-Drums TD-50X - Configuring the Routing for USB Audio (Audio Routing); Copying Settings; (Copy)

45
Using the Utilities
Conguring the Routing for USB
Audio
(Audio Routing)
This shows you how to congure the routing for the USB audio input/
output.
Use this to directly input the sound from your computer to the pads
of the TD-50X, or to limit the sounds sent from the TD-50X to your
computer.
The standard setting is “NORMAL.”
MEMO
This is enabled when the Driver Mode is “VENDOR.”
NORMAL
TD-50X
0
computer: MASTER OUT, DIRECT OUT 1–8, direct output
of each pad
PC
0
TD-50X: MAIN, SUB
PAD DIRECT IN
TD-50X
0
computer: All USB audio output from the TD-50X is
muted.
Computer
0
TD-50X: MAIN, SUB, direct input to each pad
LOOPBACK
TD-50X
0
computer: MASTER OUT, DIRECT OUT 1–8, direct output
of each pad
Computer
0
TD-50X: MAIN, SUB, direct input to each pad
* A dialog box appears when you use the “LOOPBACK” setting.
NOTE
When using the loopback setting, the USB audio input and output
may connect directly and inadvertently produce a very loud sound,
depending on the settings of your computer and the TD-50X.
For this reason, use caution with this setting.
Audio routing I/O chart
Audio Routing
NORMAL PAD DIRECT IN LOOPBACK
TD-50X
0
PC
MASTER OUT
(
Muted
(
DIRECT OUT
(
Muted
(
Direct output of each pad
(
Muted
(
PC
0
TD-50X
INPUT MAIN/SUB
( ( (
PAD DIRECT IN Muted
( (
Copying Settings
(COPY)
With the TD-50X, you can copy the respective settings within memory
or to an SD card. You can also swap the copy source and destination
settings.
NOTE
When you execute a copy operation, the contents of the copy-
destination are overwritten. If the destination contains settings that
you want to keep, back them up to an SD card (p. 53).
1. Hold down the [SHIFT] button and press the [SD CARD]
button.
The COPY MENU screen appears.
2. Use the PAGE [UP] [DOWN] and function buttons to
select the copy menu.
Copy menu Explanation
COPY MENU 1
KIT Copies the drum kit (p. 45).
PAD INST Copies the pad instruments (p. 28).
INST SET Copies multiple instruments as a set.
SET LIST Copies the set lists (p. 47).
COPY MENU 2
VOLUME
Copies the MIXER VOLUME (p. 32) settings.
PAN Copies the MIXER PAN (p. 32) settings.
AMBIENCE Copies the ambience (p. 32) settings.
MFX
Copies the multi-eect (p. 33) settings.
COPY MENU 3
TRIGGER Copies the trigger (p. 49) settings.
REC DATA
Copies recorded data (p. 25) to the SD
card.
You cannot swap the copy source and
destination.
3. Copy the settings according to the menu item that you
selected.