Roland V-Drums TD-50X - Page 46

46
Using the Utilities
Example 1: Copying a drum kit
(KIT)
1. In the SETUP MENU 1 screen, press the [F1] (KIT)
button.
The COPY KIT screen appears.
2. Press the [F1] (USER)–[F3] (SD CARD) buttons to select
the item you want to edit.
Button Explanation
[F1] (USER) button
Copies from user memory. Only if the copy-
source is user, you can exchange the copy-
source and copy-destination.
[F2] (PRESET)
button
Copies drum kits of preset memory. Choose
this if you want to return to the factory-set kit
settings.
* User samples that are assigned to a factory-
set kit cannot be copied.
[F3] (SD CARD)
button
Copies drum kits from backup data saved on an
SD card.
3. Use the cursor buttons to select a parameter, and use
the [-] [+] buttons or the dial to make the copy settings.
USER, PRESET
Copy-source
Copy-destination
User sample icon
(shown only if a drum kit that uses user samples
(p. 39) is selected)
SD CARD
Copy-source
Copy-destination
Copy-source bank number
Include or don’t include user samples
User sample icon
* If you are copying backup data that does not include user samples, you
can’t select the “With User Sample” check box.
4. Press the [F5] (COPY) button.
By pressing the [F4] (EXCHANGE) button you can exchange user
memories (USER only).
A conrmation message appears.
If you decide to cancel, select “CANCEL” and press the [ENTER]
button.
5. Select “OK,” and press the [ENTER] button.
The drum kit is copied.
Example 2: Copy multiple instruments as a set
(INST SET)
1. In the COPY MENU 1 screen (p. 45), press the [F3]
(INST SET) button.
The COPY PAD INST SET screen appears.
2. Press the [F1] (USER)–[F3] (SD CARD) buttons to select
the item you want to edit.
Button Explanation
[F1] (USER) button
Copies from user memory. Only if the copy-
source is user, you can exchange the copy-
source and copy-destination.
[F2] (PRESET)
button
Copies instruments of preset memory. Choose
this if you want to return to the factory-set kit
settings.
* User samples that are assigned to a factory-
set kit cannot be copied.
[F3] (SD CARD)
button
Copies instruments from backup data saved on
an SD card.
3. Use the cursor buttons to select a parameter, and use
the [-] [+] buttons or the dial to make the copy settings.
USER, PRESET
Instrument set to copy
Copied contents
(Copy Target)
Copy-source
Copy-destination
User sample icon
(shown only if a drum kit that uses user samples (p. 39) is
selected)