Roland V-Drums TD-50X - Making Overall Settings for the TD-50 X; (Setup); Audio Output Assignments (OUTPUT)

57
Settings
Making Overall Settings for the TD-50X
(SETUP)
The settings below are common to the entire TD-50X, such as
specifying the output destination of the TD-50X and conguring the
footswitch assignments.
1. Press the [SETUP] button.
The SETUP MENU screen appears.
2. Use the PAGE [UP] [DOWN] and function buttons to
select the setup menu for the settings you want to
make.
Menu Explanation
SETUP MENU 1
OUTPUT
Species the output destination of the sounds
(p. 57).
USB AUDIO Makes the USB audio settings (p. 43).
OPTION
Congures the preview button, MIX IN jacks, the
display and so on (p. 60).
CONTROL
Assigns functions to the footswitches and pads
(p. 60).
SETUP MENU 2
MIDI Congures the MIDI settings (p. 61).
AUTO OFF Congures the AUTO OFF settings (p. 13).
INFO
Used for checking how much memory is free on
this unit, as well as the program version (p. 61).
SETUP MENU 3
FACTORY RESET Returns the unit to its factory settings (p. 62).
3. Edit the settings of the selected menu.
Audio Output Assignments
(OUTPUT)
Here’s how to assign the audio outputs from the MASTER OUT jacks,
DIRECT OUT jacks, and PHONES jacks.
MEMO
For the USB audio settings (p. 43), the MASTER and DIRECT 1–8
jacks share the same settings with the output settings from the
MASTER OUT and DIRECT OUT jacks.
1. In the SETUP MENU 1 screen, press the [F1] (OUTPUT)
button.
2. Use the PAGE [UP] [DOWN] and function buttons to
select the function to set.
Page 1 (PAD OUTPUT)
[F1] (MASTER) button
Species each pad’s output assignments for the PHONES jacks and
MASTER OUT jacks (when OUTPUT ROUTING Master Out is set to
“NORMAL”).
[F2] (DIRECT) button
Species each pad’s output assignments for the DIRECT OUT 1-8 jacks
and MASTER OUT jacks (when OUTPUT ROUTING Master Out is set to
“DIRECT”).
[F3] (MONITOR) button
This lets you check the output volumes for each jack.
Page 2 (OTHER OUTPUT)
[F1] (MASTER) button
Species the ambience and MFX output assignments for the PHONES
jacks and MASTER OUT jacks (when OUTPUT ROUTING Master Out is
set to “NORMAL”).
[F2] (DIRECT) button
Species the ambience and MFX output assignments for the DIRECT
OUT 1-8 jacks and MASTER OUT jacks (when OUTPUT ROUTING Master
Out is set to “DIRECT”).