Roland V-Synth GT Supplementary Manual

9
List of Added Tone-FX
50: Space-D
This is a multiple chorus that applies two-phase modulation
in stereo. It gives no impression of modulation, but produces
a transparent chorus effect.
fig.MFX-28
51: 2 Band Chorus
A chorus effect that lets you apply an effect independently to
the low-frequency and high-frequency ranges.
fig.MFX-32
52: 2 Band Flanger
A flanger that lets you apply an effect independently to the
low-frequency and high-frequency ranges.
fig.MFX-33
Parameter
Value Description
Pre Delay 0.0–100.0 ms
Adjusts the delay time from the direct
sound until the chorus sound is heard.
Rate #1
0.05–10.00 Hz,
note
Frequency of modulation
Depth 0–127 Depth of modulation
Phase 0–180 deg Spatial spread of the sound
Low Gain -15– +15 dB Gain of the low range
High Gain -15– +15 dB Gain of the high range
Balance #2
DRY100:0WET–
DRY0:100WET
Volume balance between the direct
sound (DRY) and the chorus sound
(WET)
Level 0–127 Output Level
Parameter
Range Explanation
Split Freq
200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the low-range
chorus sound is heard
Low Rate #1
0.05–10.00 Hz,
note
Rate at which the low-range chorus
sound is modulated
Low Depth 0–127
Modulation depth for the low-range
chorus sound
Low Phase 0–180 deg
Spaciousness of the low-range chorus
sound
High Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the high-range
chorus sound is heard
L in
R in
Space D
Space D
L out
R out
2-Band
EQ
2-Band
EQ
Balance W
Balance W
Balance D
Balance D
R in
R out
L in
L out
Split
High Band Chorus
Low Band Chorus
High Band Chorus
Low Band Chorus
Split
High Rate #2
0.05–10.00 Hz,
note
Rate at which the low-range chorus
sound is modulated
High Depth 0–127
Modulation depth for the high-range
chorus sound
High Phase 0–180 deg
Spaciousness of the high-range chorus
sound
Balance #3
DRY100:0WET–
DRY0:100WET
Volume balance of the original sound
(DRY) and chorus sound (WET)
Level 0–127 Output volume
Parameter Range Explanation
Split Freq
200–8000 Hz
Frequency at which the low and high
ranges will be divided
Low Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the low-range
flanger sound is heard
Low Rate #1
0.05–10.00 Hz,
note
Rate at which the low-range flanger
sound is modulated
Low Depth 0–127
Modulation depth for the low-range
flanger sound
Low Phase 0–180 deg
Spaciousness of the low-range flanger
sound
Low
Feedback
-98– +98%
Proportion of the low-range flanger
sound that is to be returned to the
input (negative values invert the
phase)
High Pre Delay 0.0–100.0 ms
Delay time from when the original
sound is heard to when the high-range
flanger sound is heard
High Rate #2
0.05–10.00 Hz,
note
Rate at which the high-range flanger
sound is modulated
High Depth 0–127
Modulation depth for the high-range
flanger sound
High Phase 0–180 deg
Spaciousness of the high-range
flanger sound
High
Feedback
-98– +98%
Proportion of the high-range flanger
sound that is to be returned to the
input (negative values invert the
phase)
Balance #3
DRY100:0WET–
DRY0:100WET
Volume balance of the original sound
(DRY) and flanger sound (WET)
Level 0–127 Output volume
Parameter Range Explanation
R in
R out
L in
L out
Split
High Band Flanger
Low Band Flanger
High Band Flanger
Low Band Flanger
Split
Low Band Feedback
High Band Feedback
High Band Feedback
Low Band Feedback
V-Synth_GT_v2_e1.book 9 ページ ２００８年１２月１７日 水曜日 午前９時５分

Roland V-Synth GT Specifications

General

Brand	Roland
Model	V-Synth GT
Category	Synthesizer
Language	English