Roland VR-50HD MK II - Page 31

31
Remotely Controlling a Camera
3. Touch < >
0
<Store> to make it light red.
4. In “Camera Preset,” touch the preset number in which
you want to register the settings.
The camera settings are registered in the preset.
5. Press the [MENU] button to close the menu screen.
Recalling a Preset
Recalling from All Cameras Simultaneously
1. Press the [MENU] button
0
< >
0
Network <Camera
Control>
0
touch <All Camera Recall> to turn it “ON.”
2. In “Camera Preset,” touch the preset number that you
want to recall.
Presets are recalled from all cameras simultaneously.
3. Press the [MENU] button to close the menu screen.
Recalling from a Single Camera
1. Press the [MENU] button
0
< >
0
Network <Camera
Control>
0
touch <All Camera Recall> to turn it “OFF.”
2. In “Camera,” select the camera ID for which you want to
recall a preset.
3. In “Camera Preset,” touch the preset number that you
want to recall.
The preset recalled from the camera.
4. Press the [MENU] button to close the menu screen.