EasyManua.ls Logo

Roland VR-50HD MK II - Audio Specifications Details

Roland VR-50HD MK II
65 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Appendices
9 Audio
Audio Processing Sample rate 24 bits, 48 kHz
Audio Formats
SDI (SDI IN, SDI OUT)
Linear PCM, 24 bits, 48 kHz, 2 ch
* SMPTE 299M, SMPTE 272M-C
HDMI (HDMI IN, HDMI OUT) Linear PCM, 24 bits, 48 kHz, 2 ch
USB-AUDIO (USB STREAMING) Linear PCM, 16 bits, 48 kHz, 2 ch
Input Connectors AUDIO IN
1–4 Combo type (XLR, 1/4-inch TRS phone), balanced, phantom power (DC 48 V, 10 mA Max)
5–8
1/4-inch TRS phone type (LINE 1–2)
* AUDIO IN 5 and 7 are mic level capable. (MIC 5, 7).
9–12 RCA phono type (LINE 3–4)
Output Connectors
AUDIO OUT
MAIN (L, R) XLR type
AUX 1 (L, R) RCA phono type
AUX 2/MONITOR (L, R) 1/4-inch TRS phone type
PHONES Stereo 1/4-inch phone type
PHONES Stereo miniature type
Nominal Input Level AUDIO IN
1–4 -64 to +4 dBu (Maximum input level: +24 dBu)
5, 7 -64 to +4 dBu (Maximum input level: +24 dBu)
6, 8 +4 dBu (Maximum input level: +24 dBu)
9–12 -10 dBu (Maximum input level: +10 dBu)
Input Impedance AUDIO IN
1–4 30 kΩ
5–8 30 kΩ
9–12 7 kΩ
Nominal Output Level
AUDIO OUT
MAIN (L, R) +4 dBu (Maximum output level: +24 dBu)
AUX 1 (L, R) -10 dBu (Maximum output level: +10 dBu)
AUX 2/MONITOR (L, R) +4 dBu (Maximum output level: +24 dBu)
PHONES 72 mW + 72 mW (32 Ω load)
Output Impedance
AUDIO OUT
MAIN (L, R) 600 Ω
AUX 1 (L, R) 1 kΩ
AUX 2/MONITOR (L, R) 600 Ω
PHONES 30 Ω
Residual Noise Level
(IHF-A, typ.)
Output connectors: AUDIO OUT MAIN (L, R), AUDIO OUT AUX 2/MONITOR (L, R)
-92 dBu (All faders: Min)
-89 dBu ([MAIN] fader: 0.0 dB, Only channel [1] fader: 0.0 dB, Analog gain: Min)
-60 dBu ([MAIN] fader: 0.0 dB, Only channel [1] fader: 0.0 dB, Analog gain: Max)
* Input 150 Ω terminate
Output connectors: AUDIO OUT AUX 1 (L, R)
-100 dBu (All faders: Min)
-98 dBu ([MAIN] fader: 0.0 dB, Only channel [1] fader: 0.0 dB, Analog gain: Min)
-74 dBu ([MAIN] fader: 0.0 dB, Only channel [1] fader: 0.0 dB, Analog gain: Max)
* Input 150 Ω terminate
Audio Eects Auto mixing, Anti-feedback, 4-Band EQ, Delay, Compressor, HPF, Noise Gate, Reverb, Limiter, Voice changer, 15-Band EQ
9 Common Section
Remote Control
RS-232C connector D-sub 9 pin type
LAN port RJ45 100BASE-TX
USB Interface
USB MEMORY port (HOST) USB A type for USB MEMORY (USB ash drive, Still image)
USB port (HOST) USB A type (Use for future expansion)
USB STREAMING port (DEVICE) USB B type for USB-VIDEO (SuperSpeed/Hi-Speed), USB-AUDIO (Full-Speed)
Other Functions Preset memory (8 types), Panel lock function, EDID emulator, Auto switching (Video follows audio), Remote camera control
Display 7 inch Graphic color LCD 800 x 480 dots (touch screen)
Power Supply
AC adaptor, Secondary AC adaptor DC 9 V to 16 V (XLR-4-32 type)
* Redundant power supply
Current Draw 2.8 A
Power Consumption 67 W
Operation Temperature
+0 to +40 degrees Celsius
+32 to +104 degrees Fahrenheit
Dimensions
437 (W) x 325 (D) x 132 (H) mm
17-1/4 (W) x 12-13/16 (D) x 5-1/4 (H) inches
Weight
(excluding AC adaptor)
5.9 kg
13 lbs 1 oz
Accessories Startup Guide, Leaet “USING THE UNIT SAFELY, AC adaptor, Power cord, Ground cord
* 0 dBu = 0.775 Vrms
* This document explains the specications of the product at the time that the document was issued. For the latest information, refer to the Roland website.

Table of Contents

Other manuals for Roland VR-50HD MK II

Related product manuals